Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Fiat Ducato 2.3 Multijet

Model: Fiat Ducato X290 - Years 2014-2026
Part: Timing belt

Today's main instructions will allow us to disassemble and replace the timing belt of the Fiat Ducato 2.3 Multijet. First, we lift the vehicle and start by removing the front right wheel and the wheel arch; then we disconnect the V-belt, loosening the tensioner, as shown in the video. At this point, we remove the crankshaft pulley and then the distribution cover, disconnecting the timing belt; we replace it with the new original one, making sure it is correctly timed; we reassemble all the other components and finally the V-belt.

Posted on 12 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on a Fiat Ducato 2.3 MultiJet
Guide to Replacing the Timing Belt on a Fiat Ducato 2.3 MultiJet
Fiat Ducato (2014-2026 / X290) In this guide, we will explore the steps to remove and replace the timing belt on a Fiat Ducato 2.3 MultiJet. First, open the engine bonnet of the ve…
Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 MultiJet
Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) Let's look at the instructions on how to disassemble and replace the timing belt of the Fiat Ducato 2.3 MultiJet. First, we open the vehicle's hood a…
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos