|
Do it yourself
| |||
| ||||
Installation of an anti-intrusion plate on the driver's door of the camper.
Model: Fiat Ducato
X290
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
In this video we can see how to install a simple but ingenious alarm system for our camper: a steel plate that blocks the breaking of the driver's side door. Thieves often drill the bodywork near the lock to activate the unlocking mechanism, but with this plate it is impossible. We dismantle the door panel using the plastic lever clips (avoiding the screwdriver) Disconnect cables and screws) window lifts, speakers, handles then we move on to uncovering the mechanism by removing the insulation (which may be glued) and unscrewing the two bolts). We fix the plate (which is nothing more than a piece of steel of decent thickness) and mount it with threadlocker to make it unbreakable, then reassemble everything. It prevents quick break-ins, because whoever tries to steal will have a tough time, and at a really low cost. Pay attention to the steel cable of the unlocking mechanism, which should be hung, not removed.
Posted on 29 July 2025 by ScegliAuto
Related tutorials
Fiat Ducato
(1993-2016 /
MK 2)
The solution presented in this video greatly improves the habitability of the Ducato, especially if it is a camper. It is explained in detail how to …
Fiat Ducato
(2014-2026 /
X290)
The beep is generated by a control unit installed by the camper manufacturer or converter. Therefore, locate the control unit under the driver's dash…
Fiat Ducato
(2006-2014 /
X250)
In this video, see how to charge the engine battery of a motorhome that has been stationary for some time. The YouTuber explains that the motorhome h…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |