Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Fiat Ducato?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt of the Fiat Ducato, you will need to lift the vehicle with a jack so that the right front wheel does not touch the ground. Once the wheel is lifted, you can proceed by removing the wheel and the inner lining of the corresponding wheel arch.

The nut that secures the belt tensioner pulley can be loosened, allowing you to remove the pulley and reduce the tension of the belt. At this point, you can remove the old belt and insert the new one, adjusting the tension to ensure everything is working properly.


Posted on 31 July 2025 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Fiat Ducato 2.3 MultiJet
Replacing the Timing Belt on the Fiat Ducato 2.3 MultiJet
Fiat Ducato (2014-2026 / X290) In this guide, we will see the main instructions on how to remove and replace the timing belt on the Fiat Ducato 2.3 MultiJet. First, open the bonnet…
Replacing the Timing Belt on a Fiat Ducato 2.0
Replacing the Timing Belt on a Fiat Ducato 2.0
Fiat Ducato (2006-2014 / X250) Today's instructions will show you the main steps to remove and replace the timing belt on a Fiat Ducato 2.0. First, open the bonnet and start removi…
How to Replace the Timing Belt on a Fiat Ducato?
How to Replace the Timing Belt on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) Hello! Today, you will replace the timing belt on your Fiat Ducato. Start by positioning the vehicle on a flat surface and ensure the engine is cold …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos