Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the door stays of the Fiat Ducato X25/X290

Model: Fiat Ducato X290 - Years 2014-2026
Part: Body

In this video we will see how to replace the door stays of a Fiat Ducato, both the X250 and X290 versions: we will need a small flathead screwdriver to remove the speaker covers. The speaker box is held by three screws, which we will need to remove, while we will not need to disconnect the electrical connection. After completing this operation, we will be able to access the stay without difficulty, remembering that it is held by 4 screws: two are on the frame and two are on the door. As for the installation of the new piece, it is advisable to screw it first to the frame, and then to the door, because otherwise there is a risk of unnecessarily straining the piece.

Posted on 8 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Opening Rear Doors on Citroen Relay - Fiat Ducato
Opening Rear Doors on Citroen Relay - Fiat Ducato
Fiat Ducato (2014-2026 / X290) This guide shows how to open the rear doors of a Citroen Relay or a Fiat Ducato, as they are similar models. To open the rear door, first unlock the …
How to reset the inspection light on the Fiat Ducato
How to reset the inspection light on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) If you own a Fiat Ducato (X290) and want to learn how to correctly reset the inspection light on the instrument panel display, all you have to do is …
How to Change the Headlight Bulb of the Fiat Ducato X290
How to Change the Headlight Bulb of the Fiat Ducato X290
Fiat Ducato (2014-2026 / X290) In this tutorial video, you will learn how to remove and replace the headlight bulb of the Fiat Ducato X290. First, open the bonnet and start by unsc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos