Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the inspection light on the Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

If you own a Fiat Ducato (X290) and want to learn how to correctly reset the inspection light on the instrument panel display, all you have to do is read the following guide and follow all the steps. First, enter the cabin and start the instrument panel.

Simultaneously, press the accelerator pedal for ten seconds, then press the brake pedal ten times consecutively. At this point, turn off and then turn on the instrument panel of your Fiat Ducato to complete the procedure.


Posted on 12 August 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2013 Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will find instructions on how to perform the routine maintenance service and reset the service light on a 2013 Fiat Ducat…
How to Reset the Service Light on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) To reset the Service light on the Fiat Ducato, you need to connect a diagnostic tool to the vehicle's OBD port: this port is located on the dashboard…
How to Reset the Service on a Fiat Ducato
How to Reset the Service on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) In today's video, see how to reset the service interval on the Fiat Ducato. This tutorial also applies to the Peugeot Boxer and Citroen Jumper twins.…

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos