Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Warning light – error code

In today's video, see how to reset the service interval on the Fiat Ducato. This tutorial also applies to the Peugeot Boxer and Citroen Jumper twins. First, remember to carry out the scheduled maintenance as stated in the manual provided with your van. Once done, we can proceed. Enter the vehicle and hold down the accelerator pedal; simultaneously, turn the ignition key and pump the brake pedal seven times. After a few seconds, the service reset will begin, and you can finish the ongoing task by turning off your vehicle.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a Fiat Ducato JTD
Resetting the service light on a Fiat Ducato JTD
Fiat Ducato (2006-2014 / X250) In this guide video, we will see how to reset the service light for the regular maintenance oil change on a second-generation Fiat Ducato. First, get…
Reset Service Light on Fiat Ducato
Reset Service Light on Fiat Ducato
Fiat Ducato (2002-2006 / ) In today's video tutorial, you will learn how to reset the service light for routine maintenance on a Fiat Ducato. First, get inside the vehicle and …
How to reset the service light on a Fiat Ducato van?
How to reset the service light on a Fiat Ducato van?
Fiat Ducato (2002-2006 / ) Resetting the service light on a Fiat Ducato van is very simple. Follow these steps in this tutorial. This operation should only be performed after c…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - What does the red engine light on the Fiat Ducato 2 indicate? Read answer
    • Ducato 2002-2006 - Meaning of the dashboard warning lights on the Fiat Ducato? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos