Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the gear knob of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Shift knob

The work mentioned above, we see it being carried out in this video guide inside a Fiat 500 Abarth version, but there is no difference with Fiat 500s equipped with standard equipment. Let's move on to the operational execution: The old knob, being installed without locking screws but only by fitting, must be grabbed with hands, or if preferred with a snap pliers, and pulled forcefully upwards. After cleaning the gear lever, the new knob is positioned on it, pushed forcefully and lowered. There you go, the new knob has been correctly installed.

Posted on 14 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob and Gaiter on a Fiat 500
How to Replace the Gear Knob and Gaiter on a Fiat 500
Fiat 500 (2007-2024 / 312) Today's guide will show you how to remove and replace the gear knob and gaiter on a Fiat 500. First, get inside the cabin and start by removing the g…
How to Replace the Gear Knob on a Fiat 500
How to Replace the Gear Knob on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you begin, sit in the driver's seat of your Fiat 500. Start by prising off the top cover of the gear knob using a flat screwdriver. Next, unsc…
Guide to replacing the gear knob of the Fiat 500
Guide to replacing the gear knob of the Fiat 500
Fiat 500 (2007-2024 / 312) Below we will see the instructions that will allow us to disassemble and replace the gear knob of the Fiat 500, in simple steps. First of all, we cli…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos