Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the gear knob of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Shift knob

It will be possible to replace the gear knob of the Fiat 500 by grabbing the knob and turning it counterclockwise until it is disengaged from the top end of the selector. Once the knob is disengaged, the pin inside that connects it to the boot must be removed. The boot must be removed after releasing all the fixing clips at the base; this way it can be removed. Once the old boot is removed, a new one can be inserted, which must be connected to the corresponding knob.

Posted on 21 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Fiat 500
How to Replace the Gear Knob on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you begin, sit in the driver's seat of your Fiat 500. Start by prising off the top cover of the gear knob using a flat screwdriver. Next, unsc…
How to replace the gear knob of the Fiat 500?
How to replace the gear knob of the Fiat 500?
Fiat 500 (2007-2021 / ) To replace the gear knob of the Fiat 500, loosen the two screws located on the side of the gear knob. Once the screws are removed, you can pull the o…
How to Replace the Gear Knob of the Fiat 500?
How to Replace the Gear Knob of the Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the gear knob of the Fiat 500, use a lever tool to detach the upper part of the gear knob. This will allow you to loosen the screw underne…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos