Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Pollen Filter on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

How to replace the cabin pollen filter on a Fiat Bravo? Get a screwdriver or a battery drill: remove the plastic cover next to the centre tunnel (right side), take off the cap from the filter holder (located inside the dedicated compartment), then, extract the worn cabin filter.

Insert a new cabin filter ensuring it fits snugly around the walls of the box, refit the cap of the filter box and close the compartment in the centre tunnel with the plastics.

Check the correct installation of the previously mounted parts.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Remove the Pollen Filter on Fiat Bravo
How to Remove the Pollen Filter on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to remove the pollen filter on a Fiat Bravo? The cabin filter is located at the bottom left of the glove compartment. Use a plastic lever to deta…
Replacing the Cabin Air Filter on the Fiat Bravo
Replacing the Cabin Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this brief and simple guide, learn how to replace the cabin air filter on the Fiat Bravo by following the instructions below. First, get inside th…
How to Remove and Replace the Air Filter on a Fiat Bravo
How to Remove and Replace the Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Want to replace the air filter in your car? Here’s how to remove and replace the engine air filter on a Fiat Bravo: lift the car using a column lift …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos