Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

How to remove the door panel (front right) on a Fiat Grande Punto? Don't worry, follow this guide to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay (if you need to disconnect terminals).

Start the disassembly: use a lever to remove the window switch panel, then use a screwdriver to unscrew the securing screws on the plastic panel. Once all screws are removed, use the lever to detach all the plastic clips securing the door.

Pull the door panel away by hand, disconnect any power connectors and release cables. Carry out the necessary maintenance inside the door.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Fiat Grande Punto
How to Remove the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
Removing the Rear Door Panel on the Fiat Grande Punto
Removing the Rear Door Panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Discover in this video tutorial how to remove the rear door panel on the Fiat Grande Punto, as well as on the Punto Evo. First, open the rear door an…
How to Remove the Door Panel of a Fiat Grande Punto
How to Remove the Door Panel of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How do you remove the door panel of a Fiat Grande Punto? Don't worry, here's how to proceed. Using a screwdriver, unscrew the screws located in the a…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos