Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Cabin air filter

Today we will explain how to replace the cabin air filter on a 2012 Fiat 500. To perform the filter replacement, we need to get on board the vehicle and remove the passenger side glove box. Access the side panel of the filter, but before proceeding with the replacement, disconnect the connector. Remove the filter cover and remove the worn filter from its housing. Using a vacuum cleaner, clean the inside of the filter box from any dust and dirt residues. Insert the new filter and close the box cover. Reassemble the side panel and the glove box.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Air Filter on Fiat 500
How to Change the Cabin Air Filter on Fiat 500
Fiat 500 (2007-2024 / 312) To change the cabin air filter in your new Fiat 500, simply follow the procedure below step by step. First, obtain a new cabin air filter that is ful…
How to replace the cabin air filter of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In the following guide you will find the description of all the various steps that you need to follow to complete the replacement of the cabin air fi…
How to replace the cabin air filter on the Fiat 500?
How to replace the cabin air filter on the Fiat 500?
Fiat 500 (2014-2022 / 500 X) Replacing the cabin air filter on the Fiat 500 is not difficult and can be done independently to save on labour costs. The filter costs between £6 an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos