Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Radio from a Fiat Qubo

Model: Fiat Qubo MK 1 - Years 2008-2019
Part: Car stereo

How to remove the original radio from a Fiat Qubo? Carefully follow these steps to remove the unit. Use the original or aftermarket metal keys to detach the stereo from the Ducato. Insert the keys into the holes on the plastic cover of the stereo, pull the stereo towards you as shown in the video, and carefully extract the radio, being mindful of the various wiring (disconnect the power terminals and the antenna cable). Finally, reinstall the original radio or a generic brand with the appropriate adapter for the input and terminal connections.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to enter the unlock code for the radio in the Fiat Qubo?
How to enter the unlock code for the radio in the Fiat Qubo?
Fiat Qubo (2008-2019 / MK 1) If the radio in your Fiat Qubo locks, for example after replacing or temporarily disconnecting the battery, you will need to enter the security code …
Removing Seats from a Fiat Qubo
Removing Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In this short guide video, you will learn how to remove the rear seats from a Fiat Qubo; primarily, we will cover the essential steps. First, open th…
How to Remove the Pollen Filter on Fiat Qubo
How to Remove the Pollen Filter on Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) Let's see how to remove the pollen filter on the Fiat Qubo (Fiorino). Open the glove compartment and unclip the plastic guides (retaining screws), th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos