Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Headlight bulb

How do you replace the bulbs in the front headlight of a Fiat Ducato? Follow this guide: open the car door and pull up the lever to open the engine compartment located at the bottom left of the dashboard, then lift the front bonnet and secure it. Unscrew the headlight securing bolts with a socket wrench (remove the plastic bar under the headlight), then use a lever to extract the headlight from its housing. Prepare to replace the damaged bulbs and proceed with reassembly. Position the headlight back in the bumper slot, screw in the previously removed bolts. Finally, close the engine bonnet.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) How do you replace the headlamp bulb on a Ducato? Lift the bonnet and find the back of the front headlamp. You can remove the front headlamp if space…
Replacing Rear Bulbs on a Fiat Ducato and Citroen Jumper
Replacing Rear Bulbs on a Fiat Ducato and Citroen Jumper
Fiat Ducato (2002-2006 / ) In this video tutorial, you will learn how to change the rear light bulbs on a Citroen Jumper as well as a Fiat Ducato. We will also see how to remov…
How to Replace the Dipped Beam Bulb on Fiat Ducato
How to Replace the Dipped Beam Bulb on Fiat Ducato
Fiat Ducato (2014-2026 / X290) How to replace the bulb on a Fiat Ducato? Start by lifting the front bonnet, locate the back of the headlamp, and remove the plastic cover cap. If yo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos