Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the glass of the exterior rearview mirror of the Fiat Doblò.

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Side mirror

In a few simple steps, we will dismantle and replace the glass of the external rearview mirror of the Fiat Doblò. First, let's move to the side of the vehicle and begin to pry on the side of the mirror glass, being careful of any glass shards from the broken glass; then, we check the condition of the glass support, replacing the entire mirror if it is too damaged. At this point, we install the new mirror glass, securing it properly to the support; all that’s left is to adjust the mirror!

Posted on 1 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rearview mirror of a Fiat Doblo?
How to disassemble the rearview mirror of a Fiat Doblo?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) To disassemble the rearview mirror of a Fiat Doblo, start by removing the door panel. Find and remove the screws or bolts that secure the panel to th…
How to change the turn signal bulb of the Fiat Doblò MK2 mirror
How to change the turn signal bulb of the Fiat Doblò MK2 mirror
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this video we can see how to change the bulb of the side turn signal of the external rearview mirror. Using a flathead screwdriver, we lever and r…
Replacement of the Fiat Doblò windshield wiper blades
Replacement of the Fiat Doblò windshield wiper blades
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Over time, the rubber part of the Fiat Doblò's windshield wipers hardens and does not clean the glass well, so we need to replace them for our safety…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos