Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield wiper blades of the Fiat 500.

Model: Fiat 500 312 - Years 2007-2024
Part: Windshield wipers

To replace the windshield wiper blades on the Fiat 500, we need to purchase the ULTRAFLAT X model online or at auto parts stores. To replace the blades on the windshield, we should position the wipers vertically and press on the central part to slide off the worn blades from the arm. We then insert the new blades into the arm by pressing on the central part to secure them. To replace the rear window wiper blade, we need to position the blade vertically and press on the central part to remove the worn blade from the rear wiper arm. We then insert the new blade into the arm and return the wiper to a horizontal position.

Posted on 2 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wipers on a Fiat 500?
How to Replace the Wipers on a Fiat 500?
Fiat 500 (2007-2024 / 312) In this tutorial, you will see how to replace the wipers on a Fiat 500, a very simple and quick operation. First, ensure that the wipers are in the r…
How to Replace the Wipers on a Fiat 500
How to Replace the Wipers on a Fiat 500
Fiat 500 (2007-2024 / 312) The steps to replace the wipers on a Fiat 500 are short and simple to carry out independently. The first step is to position the wipers vertically. T…
How to replace the rear windshield wiper of the Fiat 500
How to replace the rear windshield wiper of the Fiat 500
Fiat 500 (2007-2024 / 312) Below we will discover the steps that will allow us to disassemble and replace the rear windshield wiper or rear wiper of the Fiat 500. First, move t…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 1957-1975 - Where can you find the window washer bag of the vintage Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos