Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Spark Plugs on a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Spark plugs

How do you replace the spark plugs on a Fiat Panda? Let's look at the removal process. Pull the engine compartment release lever and lift the front bonnet, securing it. The coils are located under the plastic air intake panel that covers the engine. Unscrew the panel using a socket spanner and remove it; disconnect the coils by hand and unscrew the spark plugs with your socket spanner until they come out of the cylinder head. Take the new spark plugs and insert them into the engine cylinder head, reconnect the respective power connectors, and refit the soundproofing panel.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Spark Plugs on the Fiat Panda 169
Replacing the Spark Plugs on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) How to proceed with replacing the spark plugs on the Fiat Panda 169? First, open the bonnet of the engine compartment. Prepare everything necessary f…
How to Replace the Spark Plugs in a Fiat Panda?
How to Replace the Spark Plugs in a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the spark plugs in a Fiat Panda, open the bonnet to detach the plastic cover on top of the engine block. At the front, you will find the c…
How to Replace the Spark Plugs on a Fiat Panda?
How to Replace the Spark Plugs on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the spark plugs on a Fiat Panda, open the bonnet to access the engine bay and remove the plastic cover from the top. Once removed, disconn…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos