Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reasons why the front suspension may break on a Fiat Panda.

Model: Fiat Panda 169, MK 2 - Years 2003-2012

As we see in the video, the failure of the front suspension is possible on Fiat Pandas due to the deterioration of various components, such as shock absorbers, springs, bushings, silent blocks, or CV joints. The bushings of the stabilizer bar are particularly prone to wear, and if worn, they can cause metallic noises and instability. Hitting a deep pothole, especially at high speed, can severely damage the front suspension, bending the rims, breaking the drive shafts, or damaging the suspensions; of course, the stabilizer bars and steering tie rods can also suffer damage in this situation. The good news is that changing the bushings or the end links is not a difficult job, and we can even do it ourselves.

Posted on 16 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Shock Absorbers on the Fiat Panda
How to Change the Rear Shock Absorbers on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) On the Fiat Panda, work on the rear axle with the car lifted in the workshop. Start by loosening the bolts of the rear wheel and then lift the vehicl…
Replace Side Mirror on a Fiat Panda
Replace Side Mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) It often happens, unfortunately, to hit or be hit and break the wing mirror. Now, you will learn how to remove it yourself to save on the costs of an…
How to replace the front headlight bulb of the Fiat Panda
How to replace the front headlight bulb of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replacing the front headlight bulb of your Fiat Panda is really very simple and to complete the operation you just need to follow the procedure descr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos