Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Silent Block on the Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Bushings

Replacing the silent block on a Fiat Stilo? Lift the car with a jack and remove the damaged part at the rear of the vehicle. Loosen the wheel nuts with a telescopic spanner, then remove the wheel. Use a socket spanner to undo the mounting bolt of the arm and the bolt mounted under the wheel hub, then undo the bolts on the upper part of the arm as shown in the video. Remove the arm from its seat and separate the silent block. Always compare the parts to be replaced with the new ones; if they are suitable, you can fit them. Install the silent block into the arm, tighten all bolts to the specified torque. Check the correct fitting of the parts.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump from the Fiat Stilo 1.9 JTD?
How to Remove the Fuel Pump from the Fiat Stilo 1.9 JTD?
Fiat Stilo (2001-2010 / MK 1) In this video tutorial, you will see how to remove and replace the fuel pump of the Fiat Stilo with a 1.9 JTD engine. First, climb into the rear and …
Where is the fuse box located in the Fiat Stilo?
Where is the fuse box located in the Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) If you don't yet know where the box containing all the various fuses of your Fiat Stilo is located, don't worry because in the following mini guide y…
Replacing the Speakers of the Fiat Stilo
Replacing the Speakers of the Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Follow the steps below to remove and replace the speakers of the Fiat Stilo. First, open the front door and start by removing the door panel; to do t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos