Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Service warning light

On the Fiat Punto, the service reset is performed with the engine off. With the Fiat Punto stationary, turn the ignition to MAR/ON. Use the button on the onboard computer near the dashboard (or the button at the end of the wiper lever, depending on the model) to scroll to the “Service/Maintenance” screen. When the option is visible, press and hold the command until the reset request appears; confirm by keeping it pressed or by selecting OK. Once the operation is complete, turn off and then turn on the ignition of the Fiat Punto to check that the warning no longer appears. On versions with a central display and Vehicle menu, go to Settings, then Maintenance/Service, then Reset, and confirm the procedure. If the message persists, repeat the sequence following the order and timing, and check the battery status; on some trims, the reset may require diagnostic tools.

Posted on 18 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. In this tutorial, you will see how to reset the service light on a Fiat Punto. First, perform maintenance (engine oil change and filter.. …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Let's see the information on how to reset the service light for the regular maintenance of the engine oil change in the Fiat Grande Punto. First of a…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - How do I reset the expired service warning light on my Fiat Grande Punto? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos