Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air conditioning controls on the Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Air conditioner

In this video, we will see how the air conditioning controls work in a Fiat 500L: the controls consist of rotary knobs and buttons that allow you to adjust the amount of air entering the ventilation system. There are four speed settings available, and with the temperature regulator, we can set the temperature of the air entering the cabin. The knob located on the right is used to choose between different air distribution modes. We will activate the air conditioning by pressing the central button, and the recirculation feature if the outside air quality is poor. Please note that the "recirculation" and "front defrost" modes cannot be used together.

Posted on 31 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Conditioning Compressor in the Fiat 500L
How to Replace the Air Conditioning Compressor in the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this tutorial, you will see how to replace the air conditioning compressor in the Fiat 500L, a straightforward operation that requires good manual…
How to calibrate the steering angle function on a Fiat 500L
How to calibrate the steering angle function on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video, we can see how to calibrate the steering angle function of a Fiat 500L using a diagnostic system; this is done to reset the zero posit…
Where is the OBD port of the Fiat 500L located?
Where is the OBD port of the Fiat 500L located?
Fiat 500 (2012-2023 / 500 L) If you want to analyze one or more errors detected by the control unit of your Fiat 500L, then you must necessarily know the exact location where the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos