Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to calibrate the steering angle function on a Fiat 500L

Model: Fiat 500 500 L - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we can see how to calibrate the steering angle function of a Fiat 500L using a diagnostic system; this is done to reset the zero position of the sensor. This operation may be performed after replacing the sensor, ECU, or wheel alignment.

After connecting the OBD reader to the diagnostic socket - located under the dashboard on the driver's side, by the door pillar - we select "workshop tools", then "steering angle calibration" in the chassis controls section under the electric power steering options.

To complete the procedure, we will follow the instructions displayed on the screen.


Posted on 1 February 2025 by ScegliAuto


Related tutorials

How to Fold Down the Rear Seats of a Fiat 500L
How to Fold Down the Rear Seats of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before starting, open the rear doors and the boot of your Fiat 500L. Begin by unfastening and removing the upper cover of the boot, disconnecting the…
How to Fold Down the Rear Seats of a Fiat 500L
How to Fold Down the Rear Seats of a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before starting, open the rear tailgate of the boot of your Fiat 500L. First, unclip the two cords of the parcel shelf, then dislodge and remove the …
How to Install Roof Bars on a Fiat 500L
How to Install Roof Bars on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Start by assembling the roof bars, adjusting them to the correct measurements for the roof of your Fiat 500L. Next, open the doors of your car and po…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos