Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the air filter on a Fiat Panda.

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Air filter

Let's see in this very useful video today how to replace the air filter on a Fiat Panda 1.2 gasoline model, series 169, produced from 2003 to 2012. Let's start the procedure by opening the engine compartment of our vehicle. Next, we will unclip the two release tabs of the air filter box and then open it as shown in the video. Once this is done, we can immediately remove the old air filter. After extracting the old filter, we will clean its housing before inserting a new filter. Finally, we will complete the replacement by following the reverse procedure to close everything up.

Posted on 2 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…
Removing the Engine Air Filter on a Fiat Panda
Removing the Engine Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Do you want to replace the air filter on a Fiat Panda? Let's see how to remove the air filter from inside the engine bay. Open and lift the front bon…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos