Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the inertia switch in the Fiat Mobi?

Model: Fiat Mobi MK 1 - Years 2016-2024
Part: Checks and maintenance

In this tutorial, we can see how to reset the inertia switch in the Fiat Mobi, a very simple operation. The activation of the switch, indicated by the message "FPS ON" on the dashboard, occurs in the event of an impact and allows the fuel supply to the engine to be interrupted for safety reasons. First, let's go inside the cabin, then turn on the ignition and activate the right turn signal. After a few seconds, we then activate the left turn signal, repeat both steps, and turn off the ignition. At this point, all that’s left to do is start the vehicle and check that the reset was successful.

Posted on 6 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Fiat Mobi Service light?
How do you reset the Fiat Mobi Service light?
Fiat Mobi (2016-2024 / MK 1) To reset the Service light that appears on the instrument panel of the Fiat Mobi, you need to connect a diagnostic tool to the OBD port of the vehicl…
How do you reset the Service light of the Fiat Mobi?
How do you reset the Service light of the Fiat Mobi?
Fiat Mobi (2016-2024 / MK 1) On the Fiat Mobi instrument panel, the Service light that is displayed can be reset by connecting a diagnostic tool to the corresponding OBD port of …
How to reset the tire pressure sensors of the Fiat Mobi
How to reset the tire pressure sensors of the Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) The instructions in this guide will allow us to reset the tire pressure warning light on the Fiat Mobi; before performing the reset of the TPMS senso…

Other guides you may be interested in

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos