Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Filter on Fiat Doblo

Model: Fiat Doblo Doblo 2, 263, MK 2 - Years 2009-2021
Part: Cabin air filter

Open the glove compartment and undo the securing screws of the glove box (located at the sides of the drawer); remove it from the vehicle. Next, pull off the cover plate acting as a cap and slide out the air filter from its housing (as shown in the video). Once this is done, insert the new ventilation filter into the filter holder (ensure the filter is inserted correctly without bending it). Finally, refit the cap of the box and all the components of the glove compartment as you removed them earlier.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Pollen Filter on a Fiat Doblo
Replacing the Pollen Filter on a Fiat Doblo
Fiat Doblo (2000-2009 / MK 1, 223, Doblo 1) Replacing the pollen filter on a Fiat Doblo? Follow the disassembly in the video. Remove the securing screws on either side of the glove compartment …
How to Replace the Pollen Filter on a Fiat Doblo
How to Replace the Pollen Filter on a Fiat Doblo
Fiat Doblo (2009-2021 / Doblo 2, 263, MK 2) Let's see how to replace the pollen filter on a Fiat Doblo. Open the glove compartment and unclip the plastic guides (located at the sides of the dra…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Fiat Doblo (2000-2009 / MK 1, 223, Doblo 1) Obtain a pollen filter of the same model identical to the original. The pollen filter purifies the air in the cabin and is located under the glove co…

Other guides you may be interested in

Removing Ignition Cylinder from Audi A3

In this video, you will see how to replace the ignition cylinder of the Audi A3. First, remove the side plastic cover where the fuses are located: take out the blue 1 Amp fuse. Next, disconnect the battery terminals. Now, connect the cables that run to the steering and remove the central part by pulling it towards you (the airbag). Disconnect the connector by removing it completely. Remove the two screws to take off the plastic cover of the ignition: disconnect the various control units and use a drill to break the seal of the ignition lock to remove it.

Watch the video!


by ScegliAuto

More videos