Do it yourself
Frequently asked questions about cars and motorcycles

How to install the door panel of the 1966 Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Door trim panel

Installing the front door panel on a vintage 1966 Fiat 500 is a simple and quick operation to perform independently. We position the brush on the door and push inward, allowing the data and the window crank to protrude. We secure the nuts using a socket wrench and insert the window crank. We repeat the same steps to install the left front door panel. After completing the panel installation, we close the doors to ensure that the installation has been done correctly.

Posted on 29 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (1957-1975 / Epoca) In this brief guide, you will see the main instructions that will allow you to remove the engine from the body of the classic Fiat 500 L from 1966. F…
Fiat 500 (1957-1975 / Epoca) Begin by removing the left door panel on the Fiat 500 (old model): use a screwdriver to unscrew the securing screws located in the handle, remove the…
Fiat 500 (1957-1975 / Epoca) Removing the door panel of a Fiat 500 (old model). Use a screwdriver to unscrew the securing screws located in the handle, remove the window winder a…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos