Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How to remove the front headlight of the Fiat Ducato X250

Fiat Ducato - Video tutorial

Model: Fiat Ducato X250 - Years 2006-2014
Part: Headlight
Operation: How to remove the front headlight of the Fiat Ducato X250

Open the bonnet and unscrew the screws of the plastic triangle above the headlight, place your hands under the cover and release the plastic catches by gently lifting the cover upwards. Remove the screws of the under-headlight mustache to release the fasteners, being careful not to break the supports (to release the fasteners, press lightly in the direction marked by the arrows). Once the mustache is removed, you will easily find the fixing screws of the headlight that you can unscrew to extract it. To reassemble it, repeat the same operations in sequence, making sure to apply a little grease on the clips to facilitate any further disassembly.


Posted on 13 November 2023 by ScegliAuto



Removing the front headlight on the Fiat Ducato Camper x250
Fiat Ducato (2006-2014 / X250) In today's video we will see how to remove the headlight on a Fiat Ducato Camper x250, following the instructions below. First of all we open and lif
Fiat Ducato X250 radiator fluid replacement
Fiat Ducato (2006-2014 / X250) Let's find out in this guide how to replace the coolant of the Fiat Ducato X250, in simple steps. First of all we open the bonnet and start by removi
Removing the rear-view mirror Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) Today we will see how to remove the exterior rearview mirror of a Fiat Ducato X250, following these simple instructions. Let's open the front door, f

    Frequently Asked Questions

    • Ducato 2014-2023 - How to adjust the front lights of the Fiat Ducato? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos