Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Key

Learn how to replace the battery in the key fob of a Fiat Tipo. Take the key fob and press the metal key release button; use a screwdriver to unscrew the tiny screw located in the key cover (in the space where the metal key fits). Remove the plastic battery holder (separate the two covers), then replace the battery in the key with a new one of the same size and voltage. Install the small battery in the compartment and finally in the cover. Check the proper functioning of the key fob by pressing the buttons.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Fiat Tipo?
How to Replace the Remote Battery of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the remote battery of the Fiat Tipo, lift the emergency key from the device to leverage it in its housing. This will allow you to remove t…
How to Replace the Remote Battery of the Fiat Tipo?
How to Replace the Remote Battery of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the remote battery of the Fiat Tipo, press the button on the top of the device to access the bottom of the key housing. Here, you will fin…
How to Replace the Battery in the Key Remote of a Fiat Tipo
How to Replace the Battery in the Key Remote of a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Let’s see how to replace the battery in the key remote of a Fiat Tipo by following these steps: take the remote and press the release button of the m…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos