Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Scan Radio Stations on the Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Car stereo

This guide provides instructions to scan radio stations on the Fiat 500X. First, get in the vehicle and turn on the instrument panel; then switch on the radio from the central display and press the browse option to start scanning for radio stations, as shown in the video. At this point, wait for the scan to complete, then check that the new stations are available; the stations that are loaded will vary based on the area where the scan is performed.

Posted on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Update the Radio on a Fiat 500X
How to Update the Radio on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) The radio in a Fiat 500X must be updated to function correctly. This operation is usually performed a few months after the first ignition and may the…
Setting Up the U-Connect Radio in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Setting up the U-Connect radio in a Fiat 500L is straightforward and intuitive. Before starting, it is advisable to start the engine to prevent the b…
How to turn on and off the radio of the Fiat 500 X
How to turn on and off the radio of the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Today we will explain how to turn on and off the radio of the Fiat 500X. To turn on the car radio, we must press the power button located above the v…

    Frequently Asked Questions

    • 500 2007-2022 - Why does the radio volume control on the Fiat 500 not work? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2012-2023 - How to unlock Fiat 500 car stereo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos