Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Radio of the Fiat 500X?

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Warning light – error code

See other generations:
Video tutorial

When the radio of the Fiat 500X experiences issues with its operation or Bluetooth connectivity, it may be necessary to completely reset the device. To do this, open the bonnet to access the components inside the engine bay. Disconnect the positive terminal of the battery and keep it disconnected for a few minutes.

After some time has passed, reconnect the power cable to check if the radio has returned to its original settings.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Fiat 500 (2014-2022 / 500 X) To reset the uConnect system on a Fiat 500X, turn on the central display of the radio, select Settings, and then choose "Phone/Bluetooth": then selec…
Fiat 500 (2014-2022 / 500 X) To replace the car radio in the vehicle, follow these instructions: open the glove compartment and use a sharp tool to pry off the trim surrounding t…
Fiat 500 (2014-2022 / 500 X) Do you want to remove the radio from a Fiat 500X to connect other cables? Follow these steps: Remove the radio trim from the dashboard, then use a sc…

    Frequently Asked Questions

    • 500 2007-2021 - What does the S warning light on the Fiat 500 indicate? Read answer
    • 500 2007-2022 - What warning lights are there in the dashboard of the Fiat 500? Read answer
    • 500 2014-2022 - What does the "driving mode not available" error mean on my Fiat 500X? Read answer
    • 500 2007-2024 - The "radio blocked wait" error appears on the radio of my Fiat 500, how can I unblock it? Read answer
    • 500 2007-2024 - What does the "Hill holder / ESP not available" warning light mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does the warning triangle with the exclamation point mean on the FIAT 500? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos