Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio in the Fiat 500x

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Car stereo

See other generations:
Video tutorial

To replace the car radio in the vehicle, follow these instructions: open the glove compartment and use a sharp tool to pry off the trim surrounding the radio. Then, apply pressure towards yourself to unclip and remove the radio's faceplate.

Next, unscrew the mounting screws of the radio itself and slide it out. Be careful with the rear electrical connections and disconnect them one by one. At this point, you can either reinstall the same radio or replace it with another compatible model.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Fiat 500X
Removing the Radio from a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Do you want to remove the radio from a Fiat 500X to connect other cables? Follow these steps: Remove the radio trim from the dashboard, then use a sc…
How to Reset the Radio of the Fiat 500X?
How to Reset the Radio of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) When the radio of the Fiat 500X experiences issues with its operation or Bluetooth connectivity, it may be necessary to completely reset the device. …
How do you reset the car radio in the Fiat 500x?
How do you reset the car radio in the Fiat 500x?
Fiat 500 (2014-2022 / 500 X) Note that the car radio of your Fiat 500x, the same one we see in the video, being stuck, does not necessarily have to be a cause for concern, it is …

    Frequently Asked Questions

    • 500 2007-2021 - How to activate the aux cable in a Fiat 500? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2014-2022 - What to do if the USB port of the Fiat 500X does not work? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos