Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

Learn how to change the rear brake pads of a Fiat 500. First: lift the car on a column jack to the desired height, then remove the wheel (using a telescopic spanner or air impact wrench) with the respective bolts. Unscrew the locking bolt of the brake caliper, and remove it from the wheel support.

Use a screwdriver to detach the pads from the wheel hub caliper, and fit the new pads to the brake caliper. Reattach the brake caliper with the support over the brake disc, tighten all the bolts, and remount the wheel.

Prepare to perform the same operations on the other calipers present on the vehicle.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Removing Rear Brake Pads on a Fiat 500
Removing Rear Brake Pads on a Fiat 500
Fiat 500 (2007-2024 / 312) Are the rear brake pads on a Fiat 500 damaged and need replacing? Let’s see how to remove them from the brake caliper. Lift the vehicle with a column…
Replacing the Front Brake Pads on the Fiat 500
Replacing the Front Brake Pads on the Fiat 500
Fiat 500 (2007-2024 / 312) This guide will show you how to remove and replace the front brake pads on the Fiat 500. First, lift the vehicle and start by removing the front whee…
How to Replace the Brake Pads on a Fiat 500
How to Replace the Brake Pads on a Fiat 500
Fiat 500 (2007-2021 / 312) Let's see how to replace the front brake pads on a Fiat 500. Lift the car on a column lift and remove the wheel to access the brake disc. Unscrew the…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos