Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Oil on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Engine oil

How to change the oil and filter on a Fiat 500? Follow these steps. Lift the bonnet and secure it. Use a socket spanner to unscrew the oil filter nut and remove it (as shown in the video). Raise the car on a column lift or jack; unscrew the sump plug, allow the oil to drain into a disposal container, and then refit the sump plug. Finally, top up with new oil, using the metal dipstick to measure the oil level several times until it reaches the recommended level.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2022 / 312) If the oil warning light on the instrument panel of your new Fiat 500 stays illuminated despite having recently changed the oil and filter, you need …
Fiat 500 (2007-2021 / ) In this video tutorial, you can see how to reset the service light on a Fiat 500 by following a step-by-step procedure for proper vehicle management.…
Fiat 500 (2007-2024 / 312) Need to replace the damaged oil filter on a Fiat 500? Let's look at the replacement process. Lift the car with a column lift and secure it. Use a str…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos