Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reinforcing Rear Leaf Springs on a Fiat Ducato Camper

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

The Fiat Ducato camper, due to the added weight, often experiences issues with the rear suspension: the bump stop is already in contact with the axle, preventing the leaf spring from functioning. The ride becomes stiff, and vibrations are transmitted to the cabin, risking damage to the internal furniture.

The solution is to add an additional leaf spring beneath the original to increase load capacity and restore travel. For purchase, we recommend the website molla-balestra24.it where you can find both the complete leaf spring pack with bushes and individual leaves.

Work on the hangers (to be replaced) and the shock absorbers. After installation, it is essential to adjust the alignment and reset the steering sensor (electric steering box) using diagnostic equipment.

The work, carried out with the right tools and torque settings (leaf springs at 145 Nm, shock absorbers at 140 Nm), restores driving comfort and protects the camper. Regularly check the gap between the leaf spring and the bump stop (at least 3 cm) to prevent the issue.


Posted on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Bump Stops on a Fiat Ducato
How to Replace the Rear Bump Stops on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this video, see how to replace the bump stops on a Ducato Maxi with standard leaf springs; despite having covered only a few tens of thousands of …
What to do if the leisure battery does not charge on a Fiat Ducato camper?
Fiat Ducato (2014-2026 / X290) In this video, you can see how to fix the issue of the leisure battery not charging enough to power all the appliances in a Fiat Ducato camper. You w…
How to Install a Split Charger on a Fiat Ducato Motorhome
How to Install a Split Charger on a Fiat Ducato Motorhome
Fiat Ducato (2006-2014 / X250) This video shows how to install a split charger on a Fiat Ducato motorhome. What is a split charger? It is used to manage the charge of two batteries…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos