Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bump Stops on a Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shocks

See other generations:
Video tutorial

In this video, see how to replace the bump stops on a Ducato Maxi with standard leaf springs; despite having covered only a few tens of thousands of miles, the vehicle was completely 'sunk' with the leaf springs exhausted and the bump stops destroyed.

The YouTuber had the leaf springs replaced with a reinforced model, thinking that at that point the bump stops would no longer be needed; later, he decided to do the replacement work himself.

It is a relatively simple and quick job. You will need a chisel and a hammer (which can solve any mechanical problem), but a spray of WD-40 can also help effectively. You can find them on Auto-Doc with code 1182R0015, priced at £13.85 each plus £9.95 for delivery.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads of the Fiat Ducato x250
How to Replace the Rear Brake Pads of the Fiat Ducato x250
Fiat Ducato (2006-2014 / X250) This guide shows how to replace the rear brake pads of the Fiat Ducato x250; this procedure is also applicable to the Citroen Relay. The first step i…
Instructions for Removing the Rear Door of a Fiat Ducato
Instructions for Removing the Rear Door of a Fiat Ducato
Fiat Ducato (2006-2014 / X250) In today's video, you will see the main instructions for removing the rear door of a Fiat Ducato by following these steps. First, open both rear door…
Opening Rear Doors on Citroen Relay - Fiat Ducato
Opening Rear Doors on Citroen Relay - Fiat Ducato
Fiat Ducato (2014-2026 / X290) This guide shows how to open the rear doors of a Citroen Relay or a Fiat Ducato, as they are similar models. To open the rear door, first unlock the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos