Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Split Charger on a Fiat Ducato Motorhome

Model: Fiat Ducato X250 - Years 2006-2014
Part: Checks and maintenance

This video shows how to install a split charger on a Fiat Ducato motorhome. What is a split charger? It is used to manage the charge of two batteries, especially in motorhomes where there is a primary battery and one for various uses. In this case, the two cables go to the starter battery and the other to the service battery. The blue cable goes to the engine battery, passing through the glove compartment on the passenger side (which must be removed first). Route it under the dashboard and through the step on the passenger side, where there is a hole for other cables. Guide it from underneath and use existing holes to keep it in position.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Positioning of the internal fuses of the Fiat Ducato Camper
Positioning of the internal fuses of the Fiat Ducato Camper
Fiat Ducato (2014-2026 / X290) Today we will discover the positioning of the internal fuse boxes of the Fiat Ducato Camper, following these simple steps. First, we get on board the…
How to Install Armrests on a Fiat Ducato Camper
How to Install Armrests on a Fiat Ducato Camper
Fiat Ducato (2006-2014 / X250) Installing armrests on the seat of a Fiat Ducato camper is a very simple operation that you can carry out independently, thanks to our video tutorial…
How to Replace the Leisure Battery in a Fiat Ducato Camper
How to Replace the Leisure Battery in a Fiat Ducato Camper
Fiat Ducato (2006-2014 / X250) Learn how to change the leisure battery in your Fiat Ducato camper. It’s not straightforward, as you need to completely remove the driver’s seat by t…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos