Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel of a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Steering wheel

See other generations:
Video tutorial

How to replace the steering wheel of a Fiat Punto? Follow these simple steps for the replacement. Insert a screwdriver or bit into the side slots on the steering wheel and unscrew the locking pins.

Once the pins are removed, disconnect the airbag and its power connectors. Use a socket wrench to unscrew the steering wheel pins, then pull the steering wheel off the steering column.

For reassembly: connect the power connector, then insert the steering wheel onto the steering column, press it in with your hands until it is fully seated, and tighten the locking pins.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to remove the steering wheel from the Fiat Punto Evo?
How to remove the steering wheel from the Fiat Punto Evo?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the steering wheel from the Fiat Punto Evo, loosen the bolts located at the back of the steering wheel. These are found on both sides, and …
How to disassemble the airbag and steering wheel of the Fiat Grande Punto.
How to disassemble the airbag and steering wheel of the Fiat Grande Punto.
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today we will look at the instructions on how to disassemble and replace the steering wheel and its airbag on the Fiat Grande Punto and Punto Evo. Fi…
How to Remove the Steering Wheel from a Fiat Grande Punto?
How to Remove the Steering Wheel from a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the steering wheel from a Fiat Grande Punto, loosen the two screws located at the back of the steering wheel, on the right and left sides. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos