Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
Punto EVO, Grandepunto , MK 3, 199
- Years 2005-2018 Let's see how to remove the steering wheel with airbag on a Fiat Grande Punto. Very simple operation, we see in this guide how to proceed. We insert the screwdriver with inserts or keys (medium length) in the lateral slots placed in the steering wheel and release the clamping spring. Once the springs have been released, we disconnect the airbag with its power supply terminals. Unscrew the pin located in the center of the steering wheel with a socket wrench; we extract the same from the steering rod. To reassemble the steering wheel we connect the power supply clamp, then, insert the steering wheel into the steering tube, press the same with our hands, until we reach the inside, screw the locking pins.
Posted on 26 November 2023 by ScegliAuto
How do you remove the steering wheel of the Fiat Grande Punto?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In order to remove the steering wheel of the Fiat Grande Punto, it is necessary to loosen the two screws located in the rear part of the steering whe
Replacement of the steering column of the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video tutorial we will see how to disassemble and replace the steering column of the Fiat Grande Punto, but also of the Punto Evo. First of a
How to remove the steering wheel airbag in the Fiat Grande Punto?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) As we can see in this short tutorial, removing the steering wheel airbag in the Fiat Grande Punto is a very simple and fast operation. Before proceed Other guides that may interest you
|
Frequently Asked QuestionsHow do you replace the horn on the Citroà «n Berlingo?In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.062
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |