Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Number Plate Light on Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: License plate light

Are the number plate bulbs on your Fiat Panda blown? Here's how to replace them. Remove the transparent plastic cover of the number plate light located on the rear tailgate of the car. Once the lens is removed, pull out the bulb holder by hand, then disconnect the bulb from it. Install the new bulb (same size and voltage), place it back into the bulb holder, and reattach it to the tailgate, pressing until it locks automatically. Refit the transparent plastic cover and test the new bulbs.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Number Plate Lights on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will see how to replace the number plate lights on a third-generation Fiat Panda. First, obtain the new bulb; open the bo…
How to Replace the Number Plate Light Bulbs on a Fiat Panda?
How to Replace the Number Plate Light Bulbs on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) This tutorial shows how to replace the number plate light bulbs on a Fiat Panda, a very simple and quick operation. Before proceeding, ensure that th…
How to Perform a Full Service on a Fiat Panda
How to Perform a Full Service on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If you want to perform a full service on your Fiat Panda without going to a garage, and thus save money, you can use this video as a guideline for th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos