Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light Bulbs on a Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: License plate light

This tutorial shows how to replace the number plate light bulbs on a Fiat Panda, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by going to the rear of the vehicle, then open the tailgate and, using a flat-head screwdriver, remove the glass of the light by prying at the side slot. Next, release the old bulb, using the screwdriver if necessary, and insert the replacement in any orientation. Just be sure not to touch the new bulb directly with bare hands, as any residue could cause it to overheat.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Knob Bulbs on a Fiat Panda
How to Replace the Knob Bulbs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, sit in the driver's seat of your Fiat Panda. Start by prising off and removing the two smaller knobs by pulling them towards you. N…
Replacing the Number Plate Lights on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will see how to replace the number plate lights on a third-generation Fiat Panda. First, obtain the new bulb; open the bo…
Remove the Climate Control Knobs on Panda
Remove the Climate Control Knobs on Panda
Fiat Panda (2012-2026 / 319, MK 3) Remove the climate control knobs from the Fiat Panda? Remove the knobs if you need to replace them or the bulbs inside. Locate the panel with the ven…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos