Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Car stereo

Is the radio in your Fiat 500 damaged? Here’s how to remove it. Remove the radio buttons (2 on the right and 2 on the left), using the original or aftermarket metal keys to take out the stereo. Insert the keys into the holes on the plastic cover of the stereo, pull towards you as shown in the video, and extract the radio, being careful of the various wiring (disconnect the power connectors and the antenna cable). Insert the new original radio or a generic brand after connecting the electrical terminals (with the appropriate adapter if 2 DIN).

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Enter the Radio Code on a Fiat 500
Fiat 500 (2007-2021 / ) This guide provides instructions to find or generate the radio code for the Fiat 500's standard radio. The unlock code is usually found on a label at…
How to Generate the Radio Code for the Fiat 500
How to Generate the Radio Code for the Fiat 500
Fiat 500 (2007-2021 / ) Discover in this guide how to generate the radio code for the Fiat 500, as well as for other models from the manufacturer. First, remove the radio an…
How to replace the car radio in the Fiat 500x
How to replace the car radio in the Fiat 500x
Fiat 500 (2014-2022 / 500 X) To replace the car radio in the vehicle, follow these instructions: open the glove compartment and use a sharp tool to pry off the trim surrounding t…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Why does the radio volume control on the Fiat 500 not work? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2012-2023 - How to unlock Fiat 500 car stereo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos