Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wishbone on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Control arm

Removing the wishbone on this car may seem a bit cumbersome, but it is not very complex; follow the step-by-step instructions and you can do it too. Start by lifting the car, then remove the wheel from the side of interest. After that, also remove the wheel arch cover to access the part to be replaced. Using plenty of lubricant, unscrew the bolts that secure the wishbone to the chassis and the wheel. With the help of a chisel, pry open the sealed brackets to remove the old wishbone. Before reassembling everything, clean the housings with a wire brush to make the process easier.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the radio on Fiat Bravo
How to remove the radio on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace a damaged car stereo on a Fiat Bravo? Let's see the disassembly. We use the original metal keys to disassemble the stereo of the Fiat …
How to replace the side indicator on a Fiat Bravo
How to replace the side indicator on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Using a thin but resistant plastic tool and leveraging, let's start by disengaging the indicator light of our Fiat Bravo. Once this is done, we will …
How to remove the gear knob of the Fiat Bravo
How to remove the gear knob of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To disassemble the gear knob located inside the cabin of your Fiat Bravo correctly and safely, you must follow all the steps described in our new gui…

How to Replace the Lift Supports on a Porsche 911

How to remove and replace the lift supports for the hood on a Porsche 911? Let's see how to replace them in this video: Lift the hood and secure it. Use a screwdriver or metal lever to detach the clips that hold the lift support at both ends (or unscrew the mounting pins). Install the new part onto the sheet metal of the front trunk, securing the lift support with the clips/pins. Proceed in the same manner for the removal/installation of the opposite lift support. Finally, test the gas springs installed earlier.

Watch the video!


by ScegliAuto

More videos