Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Seats on a Fiat Qubo

Model: Fiat Qubo MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Seat

Video tutorial

Removing the rear seats on this vehicle is very simple and designed to be done by anyone without any special tools. Start by removing the cover panel of the boot, then locate the two levers at the back of the vehicle that operate the folding of the seat backs.

This operation may be sufficient to increase the capacity of the boot. You can also pull the lever at the base of the seat to achieve further folding.

If this is still not enough, you can completely remove the seats by operating the final lever that secures the front hinges at the base of the seats.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Removing Seats from a Fiat Qubo
Removing Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In this short guide video, you will learn how to remove the rear seats from a Fiat Qubo; primarily, we will cover the essential steps. First, open th…
How to Remove the Original Radio from a Fiat Qubo
How to Remove the Original Radio from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) How to remove the original radio from a Fiat Qubo? Carefully follow these steps to remove the unit. Use the original or aftermarket metal keys to det…
How to Service the Rear Brakes on a Fiat Qubo
How to Service the Rear Brakes on a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In today's video, see how to maintain the rear brakes on a Fiat Qubo. First, lift the van using a ramp or, if unavailable, a jack or similar. Next, r…

    Frequently Asked Questions

    • Qubo 2008-2019 - How do you remove the rear seat of the Fiat Qubo? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos