Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : Fiat 500 gear knob replacement

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Gear Shift Knob
Operation: Fiat 500 gear knob replacement

In this video we are going to see how to remove the gear knob of the Fiat 500 city car. To do this we are going to remove the plastic cap where the gears are marked with something sharp: under it you will find a screw that we are going to remove. with socket wrench. So let's go take out the gear knob and put a new one on. If you also want to disassemble the cap, just remove the interlocking band and extract the cap held by the special band that we are going to cut. Remember to use only original spare parts in order to have long-lasting components.


Posted on 7 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How much does the Fiat 500 L gear lever knob cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos