Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to remove the front bumper on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Front bumper
Operation: How to remove the front bumper on Fiat 500

Is the front bumper of the Fiat 500 damaged? Let's take it apart and replace it. Let's lift the bonnet and put it in safety. We lift the car with a jack. We remove the fog lights placed in the lower part of the bumper. With a socket wrench we unscrew the tightening screws located in the upper part of the bumper. Once we have removed the screws in the upper part, we unscrew the screws of the stone guards. We remove the bumper from the car body by hand. To proceed with the assembly: let's fix the bumper on the car body with our hands and proceed to tighten all the screws both around the stone guard and around its perimeter. We mount the fog lights.


Posted on 9 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos