Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacement ceiling light on a Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Interior lights ceiling light bulb
Operation: Replacement ceiling light on a Fiat 500

Disassembly of the ceiling light if it is damaged or if we need to replace the bulbs. Let's see how it disassembles. With a screwdriver we pry between the ceiling light and the roof covering panel (we do not damage the panel), take the ceiling light out of the panel, disconnect the power supply terminal. We replace the ceiling light if it is damaged or we replace the damaged bulbs with new ones (same size and voltage). We connect the electrical clamp to the ceiling light. We push the ceiling light with our hands until it is completely blocked in the panel (we connect the electrical terminals). We test the correct functioning of the ceiling lights.


Posted on 10 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2021 - How to replace the light bulbs in the Fiat 500? Read Answer
    • 500 2007-2023 - Why doesn't the interior light of the Fiat 500 come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos