Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Driver's Door Panel on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Door trim panel

Before proceeding with the removal of the driver's door panel on the Fiat Grande Punto, secure the vehicle on a flat surface or on a ramp. Now, remove the trim covering the screw in the door handle housing and unscrew the screw underneath. Next, unscrew the two screws located near the door handle. Finally, unscrew the four screws that secure the panel at the bottom. At this point, take a small crowbar and unlock the clips holding the panel in place, and pull the panel off from the top. Be careful to disconnect the electrical supply and the mechanisms for opening the door.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel on the Fiat Grande Punto
Removing the Rear Door Panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Discover in this video tutorial how to remove the rear door panel on the Fiat Grande Punto, as well as on the Punto Evo. First, open the rear door an…
Removing the Rear Door Panel from a Fiat Grande Punto
Removing the Rear Door Panel from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove the rear door panel from a Fiat Grande Punto. First, open the door and then remove the window ha…
Removing the Front Door Panel of the Fiat Punto
Removing the Front Door Panel of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide shows you how to remove and replace the front door panel of the Fiat Punto, following the instructions below. First, open the front door a…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos