Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Remove the rear seat of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Seat
Operation: Remove the rear seat of the Fiat 500

Remove the rear seat of the Fiat 500? We open the trunk lid and lower the seat backs. Unscrew the locking pins on the sides of the metal guides of the back with a special socket wrench (the same operation is done on the other side of the back). We extract the backrests from the body of the car (remove the seat belts if necessary for removal). We remove the seats of the rear seats. We mount the new rear seats with screws in tow (backrests and seats). We close the tailgate of the luggage compartment at the end of the assembly of the rear seats.


Posted on 17 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 1957-1975 - How much do the seats of a vintage Fiat 500 cost? Read Answer
    • 500 2014-2022 - Why does the lumbar adjustment of the seat on the Fiat 500X not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos