Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Boot Lock on Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Door lock

In this video, you will see the main instructions for removing the boot lock on a Fiat 500 in simple steps. First, open and lift the boot lid and remove the panel; then, using a 10 mm spanner, remove the securing screws of the lock and extract it, as shown in the video. At this point, disconnect the electrical connector to remove it completely and replace the entire mechanism if necessary. Finally, refit everything by applying the reverse procedure of disassembly.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats from a Fiat 500
How to Remove the Rear Seats from a Fiat 500
Fiat 500 (2012-2023 / 500 L) Before you can start, open the boot of your Fiat 500 and remove the boot carpet. This will give you access to the bolts securing the rear seat backre…
How to open the trunk of the Fiat 500 in an emergency
How to open the trunk of the Fiat 500 in an emergency
Fiat 500 (2007-2024 / 312) Today we will explain how to emergency open the trunk of the Fiat 500 model produced from 2016 to 2021. To open the trunk in emergency mode, we need …
Replacement of the Boot Release Button on the Fiat 500 Abarth
Replacement of the Boot Release Button on the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) In this brief guide, you will find the instructions to remove and replace the boot release button on the Fiat 500. First, open the rear boot lid and …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos