Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Boot Release Button on the Fiat 500 Abarth

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Push button

See other generations:
Video tutorial

In this brief guide, you will find the instructions to remove and replace the boot release button on the Fiat 500. First, open the rear boot lid and begin to dismantle and remove the internal trim, thus accessing the handle button; disconnect the button cable and unscrew the fastening screws to remove it from the handle, as shown in the video.

At this point, install the new boot release button, securing it properly; check its correct operation before reassembling the internal trim.


Posted on 14 February 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the 2017 Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Locating the OBD port inside your 2017 Fiat 500 Abarth can be challenging as it is well hidden within the dashboard and not easily visible. Follow th…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Replacing the Rear Lights on the Fiat 500 Abarth
Replacing the Rear Lights on the Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) In today's tutorial video, you will find the instructions to remove and replace the rear lights with those from the facelift version of the Fiat 500 …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos