Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace external handle on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Handle
Operation: How to replace external handle on Fiat 500

Remove the external handle of the 500? Let's see the disassembly of the handle from above the door. Unscrew the locking pins in the fixed handle located on the door panel with a screwdriver, unscrew the pins located in the plastic of the door opening lever. We remove the internal handle from the door panel, then, with a lever we detach the panel of the covering. We detach the adhesive panel of the door with the lever, disconnect the cable of the lever opening, then unscrew the locking pins of the external handle. We remove the handle from inside the door sheet. We mount the new handle inside the door and all the related parts.


Posted on 17 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - Why does the Fiat 500 door handle not work? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 handle? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos